Latest news
News flash
Thank you for stopping by
You have happened yourself upon the elite wheel and tire installer page on the internet. We have a shop located just outside of Denver, CO and we do it all; from Lifted trucks to little minivans and we will be blogging here about it...Stay Tuned...
Archive for the ‘wheels’ Category
Jim Beam Anyone??
We Got to Hook This Sick Ride Up!
Shouts Outs to The JB Ladies!
Jim Beam Party Crew Parties In Any Weather!
56′ Chevy Flyin’ High
Before the After Effect..
Big Black In Progress…
One Of the Techs Davey And His dream Car..
Dream On Buddy…
Now Thats a Salesman Proud Of His Work..
..FINALLY..
FINISHED!
…You Didn’t Know About the 2010 Camaro!
Thee before and After Effect!
-
- stock
-
- stock
-
- mountin
-
- gettin it loaded
Nitto Invo!!!
No Wheels 4 the Neon
I have 215/50R17 for my 1995 Plymouth Neon 4dr sdn. The do not fit under the Start base. I can get the Front tires on but they rub. The back will not go on at all. I need to get spacers but I am not sure how far out I need to place the tires. Especially in the rear. And then I know because of the Added weight and the change of the center of gravity, I need to beef up the suspension. any *assistance would be Phenomenal! Thanks “JC”
Chevy S-10 Wheels & Tire Switch
Hi All,
I have a 1994 Chevy S-10 2 whl drive, that I want to put the larger wheels/tires onto, from my 1988 S-10 4×4. (Those tires are P 235/75/15’s).
They don’t fit on the 1994 S-10 due to the front wheel bearing/hub sticking out too far, on the front.
And on the rear, they scrape on the edges of the leaf springs.
CAN ANYONE HELP ME to figure out WHAT SIZE wheel spacers I need for the front, and for the rear?
Thanks!
iambler@earthlink.net
-Irv Ambler – New Fairfield, CT
Wheel Locks
I seem to have lost my wheel lock key for my American Racing wheels I purchased at Performance 3 years ago. Would they have a replacement key for these or an emergency key to get the wheels off so the ties can be rotated or replaced? Or am I SOL in this case?
Missing Center Peice
I have a set of 20″ Niche F18B’s on my Dodge Charger RT, I noticed I am missing the center piece that covers the hole to the rotor bolt…
How can I locate a replacement piece? Are there other options I can explore?
02 F250 with 07 oem 20’s
Hey Everybody,
My name is Matt and I am in North Carolina. I need some help. I have a 2002 Ford F250 and it has the oem 16 inch wheels on it with tires that are 305/75/16 and I just bought a set of 2007 Ford F250 OEM 20 inch wheels and put them on my truck and when I turn the wheel over hard to the left or right the tire hits the leafspring. What should I do? I talked to a guy about spacers and he mentioned that I could do that but the wheels would not be “hubcentric” and that they wouldn’t work. Has anyone dealt with this or know what I should do. The wheels look awesome but I need some help. Please any suggestions would be appreciated Thanks in advance!
Recent Comments