Latest news
News flash
Thank you for stopping by
You have happened yourself upon the elite wheel and tire installer page on the internet. We have a shop located just outside of Denver, CO and we do it all; from Lifted trucks to little minivans and we will be blogging here about it...Stay Tuned...
Archive for the ‘Spacers’ Category
Lift?
I have a 93 GMC 2500 4×4 and would like to fit 44’s under. Am getting Bushwacker cutout fender flares. Not sure yet how much fender is required to trim for the fender flares. How much lift not including the cutouts will I need to fit the tires? Also will I need spacers for the front axle? Am getting a straight axle conversion plus a ford front axle for it. Also does anyone know if it is possible to put rubbers spacers between leaf springs to make the ride better? Thank you for the help
Tim
Adapter/Spacer Questions – Rules
Post in here if you have any questions regarding Adapters/Spacers.
Suggested thickness, availability, shipping methods, special requests or anything else you can think along those lines.
We know some Adapter/Spacer questions will involve wheels and tires but please do not cross post as the same technicians will be answering all forums so it will be answered.
We work hard to answer your questions as soon as possible.
Cross posts will be deleted
Duplicate posts will be deleted
No “Bump” messages either please!
I’m very responsible, when ever something goes wrong they always say I’m responsible
Wheel Spacer for dually
I have a ‘06 Chevy 3500 DRW and want to increase size of my tires. What spacers kit do I need? Also if I put in a space, will I have to replace my wheel studs or anything like that? I am looking to go from a 215/85-16 to a 265/85-16 or something a little bigger.
-navyman
CONVERISION TO DUALLY
I WANT TO MAKE MY 2007 CHEVY 2500HD INTO A DUAL WHEEL HAULER, WHAT DO I NEED IN SPACERS FRONT AND REAR AND HOW DEPENDABLE ARE THEY. THANK YOU.
Wheel Spacers
I HAVE A 2007 DOGE RAM 3500 MAG CAM DULLY AND 4*4
I WANT TO CHANGE MY TIRES TO LT315/70R17 BF GOODRICHWHAT SIZE OF SPACERS DO
I NEED
-bennyz
subura legacy
I bought some universal 4 lug wheels and i want to put them on my 1992 subura legacy what would i have to do to make them fit. thank you.
-allent
wheel spacers
Chevy S-10 Wheels & Tire Switch
Hi All,
I have a 1994 Chevy S-10 2 whl drive, that I want to put the larger wheels/tires onto, from my 1988 S-10 4×4. (Those tires are P 235/75/15’s).
They don’t fit on the 1994 S-10 due to the front wheel bearing/hub sticking out too far, on the front.
And on the rear, they scrape on the edges of the leaf springs.
CAN ANYONE HELP ME to figure out WHAT SIZE wheel spacers I need for the front, and for the rear?
Thanks!
iambler@earthlink.net
-Irv Ambler – New Fairfield, CT
04 F-250 4X4
2007 F-250 4X4 20 INCH WHEELS,INSTALLED ON 2004 F-250 4X4 TIRES RUB ON LEAF SPRINGS FRONT ONLY WHAT SIZE SPACERS ARE NEEDED? HAS ANYBODY EVER DONE THIS
-BUDROE
Recent Comments