Latest news
News flash
Thank you for stopping by
You have happened yourself upon the elite wheel and tire installer page on the internet. We have a shop located just outside of Denver, CO and we do it all; from Lifted trucks to little minivans and we will be blogging here about it...Stay Tuned...
Archive for November, 2009
Chevy S-10 Wheels & Tire Switch
Hi All,
I have a 1994 Chevy S-10 2 whl drive, that I want to put the larger wheels/tires onto, from my 1988 S-10 4×4. (Those tires are P 235/75/15’s).
They don’t fit on the 1994 S-10 due to the front wheel bearing/hub sticking out too far, on the front.
And on the rear, they scrape on the edges of the leaf springs.
CAN ANYONE HELP ME to figure out WHAT SIZE wheel spacers I need for the front, and for the rear?
Thanks!
[email protected]
-Irv Ambler – New Fairfield, CT
04 F-250 4X4
2007 F-250 4X4 20 INCH WHEELS,INSTALLED ON 2004 F-250 4X4 TIRES RUB ON LEAF SPRINGS FRONT ONLY WHAT SIZE SPACERS ARE NEEDED? HAS ANYBODY EVER DONE THIS
-BUDROE
Seeking employment
I was wondering how to apply online?
Wheel Question – Rules
Post in here if you have any questions regarding wheels.
Availability, pricing, fitment, or anything else you can think along those lines.
We know some wheel questions will involve tires but please do not cross post as the same technicians will be answering both forums so it will be answered.
We work hard to answer every question as soon as possible!
Cross posts will be deleted�
Duplicate posts will be deleted�
No “Bump” messages either please!
I’m very responsible, when ever something goes wrong they always say I’m responsible
new holes?
I own a sand buggy on a 71 vw chassis and I have found a pair of early 90s mustang solid aluminium spare wheels I know that these wheels can be re-drilled to fit on a 4-130 bolt pattern, can you drill these wheels and how much do you charge. I think that i am going to stud the front hubs and use a acura stud and a 1/4 inch spacer
-Bobby M
Spacers
I have a 1970 2 wheel drive ford f100. I want to put three inch spacers on the back. What would you recommend?
-amanda
WHEELS
Do you do trades for OEM wheels. I have a set of 4 2006 Odyssey Touring wheels I would like to trade for a set of 4 05-07 Cobalt LT 15″ 4 lug Alum wheels.
Wheel Locks
I seem to have lost my wheel lock key for my American Racing wheels I purchased at Performance 3 years ago. Would they have a replacement key for these or an emergency key to get the wheels off so the ties can be rotated or replaced? Or am I SOL in this case?
Missing Center Peice
I have a set of 20″ Niche F18B’s on my Dodge Charger RT, I noticed I am missing the center piece that covers the hole to the rotor bolt…
How can I locate a replacement piece? Are there other options I can explore?
02 F250 with 07 oem 20’s
Hey Everybody,
My name is Matt and I am in North Carolina. I need some help. I have a 2002 Ford F250 and it has the oem 16 inch wheels on it with tires that are 305/75/16 and I just bought a set of 2007 Ford F250 OEM 20 inch wheels and put them on my truck and when I turn the wheel over hard to the left or right the tire hits the leafspring. What should I do? I talked to a guy about spacers and he mentioned that I could do that but the wheels would not be “hubcentric” and that they wouldn’t work. Has anyone dealt with this or know what I should do. The wheels look awesome but I need some help. Please any suggestions would be appreciated Thanks in advance!
Recent Comments